Pipe Fittings

Cast Iron Pipe Flange    Measures 1-3/4"  Four (4) mounting holes (9/32" fits 1/4" screws) Mounting hardware NOT included, but you can use purchase our optional panhead screws.   Threaded for 1/8 IPS inner female...

St. Louis Iron Pipe Flange - Flat Black finish These flanges are great. made of cast iron and female threaded in the center, they are ready to be mounted wherever you need them.  Features: Cast Iron Measures 2-13/16" Diameter Height 1" Three...

Hickey - Solid Brass - 3/4" Our Hickeys are a great way to channel wire out of tubes, rods, and pipe to another location.  Features: Female threads 1/8 IPS on each end.  3/4" Height 3/4" outside diameter Solid Brass

Hickey - Cast Iron - 1" Our Hickeys are a great way to channel wire out of tubes, rods, and pipe to another location.  Features: Made of cast iron Female threads 1/8 IPS on each end.  1" Height 5/8" thick 1-1/8" Wide

Hickey - Zinc - 1-1/2" Our Hickeys are a great way to channel wire out of tubes, rods, and pipe to another location.  Features: Female threads 1/8 IPS on each end.  1-1/2" Height 3/4" thick 3/4" Wide 8-32 Ground Hole

Hickey - Zinc - 1/2" Our Hickeys are a great way to channel wire out of tubes, rods, and pipe to another location.  Features: Female threads 1/8 IPS on each end.  1/2" Height 13/16" thick 13/16" Wide 8-32 Ground Hole

Pipe Cross - Cross - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT       

Pipe Cross - 6-Way Cross - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT  Intended for decorative purposes only for lamps, lights, shelves, clothes racks, tables, benches, etc.  This fitting is NOT to be used for...

Pipe Elbow - 45 Degree - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT 150 psi       

Pipe Elbow - 90 Degree - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT 150 psi       

Pipe Elbow - Black Malleable Iron - Threaded 1/8" FNPT    Threaded for 1/8" FNPT 150 psi  Quantity discounts available (click on "Buy Bulk and Save" under the black "Add to Cart" button above.....discount will be shown once added to...

Pipe Elbow - Black Malleable Iron - Threaded 1/8" FNPT  Threaded for 1/8" FNPT 150 psi  Quantity discounts available (click on "Buy Bulk and Save" under the black "Add to Cart" button above.....discount will be shown once added to shopping...

Pipe Nipple - Closing - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT 150 psi  Closing Nipple - 1-1/8" Long      

Pipe Nipple - Black Malleable Iron - Threaded 1/4" FNPT    Threaded for 1/4" FNPT 150 psi  7/8" long Quantity discounts available (click on "Buy Bulk and Save" under the black "Add to Cart" button above.....discount will be shown...

Pipe Reducer Coupling - Black Malleable Iron - 1-1/2" to 1/2" FNPT    Threaded to bring iron pipe together. One side fits 1-1/2" pipe and the other fits 1/2" pipe      

Pipe Reducer Coupling - Black Malleable Iron - 1-1/4" to 1/2" FNPT  Threaded to bring iron pipe together. One side fits 1-1/4" pipe and the other fits 1/2" pipe This works with our Rubber Sockets if you want to create a nice tight fit for...

Pipe Reducer Coupling - Black Malleable Iron - 1/2" to 1/4" FNPT  Threaded for 1/2" FNPT 150 psi on one end and 1/4" FNPT on the other This listing is for the Reducer Fitting only. Other photos may show more products to give you ideas, but only...

Pipe Reducer Coupling - Black Malleable Iron - 1/2" to 1/8" FNPT  Threaded for 1/2" FNPT 150 psi on one end and 1/8" FNPT on the other If using with our threaded brass tubing or threaded rods, the reducer may need to be reamed out slightly...

Pipe Reducer Coupling - Black Malleable Iron - 1/4" to 1/8" FNPT    Threaded for 1/4" FNPT 150 psi on one end and 1/8" FNPT on the other Quantity discounts available (click on "Buy Bulk and Save" under the black "Add to Cart" button above....

Spring Clutch Swivel - Metal Clutch Elbow with an Antique Black Finish  Our Spring Clutch Swivel Elbow will create an awesome "industrial look" for your next project.  This 3-way elbow utilizes an adjustable spring to keep tension. Please see...

Pipe Tee - Black Malleable Iron - Threaded 1/2" FNPT  Threaded for 1/2" FNPT 150 psi       

Pipe Tee - Black Malleable Iron - Threaded 1/8" FNPT    Threaded for 1/8" FNPT 150 psi  Quantity discounts available (click on "Buy Bulk and Save" under the black "Add to Cart" button above.....discount will be shown once added to...

3-Way Clutch Elbow - Cast Brass with an Antique Black Finish  Use with our 1/8 IPS Tubing or 1/8 IPS threaded rod.   Features: Solid Cast Brass finished in a Antique Black Has three 1/8 IPS female threads Swivels No Teeth Has...

3-Way Clutch Elbow - Cast Brass with a Antique Copper Finish  Use with our 1/8 IPS Tubing or 1/8 IPS threaded rod.   Features: Solid Cast Brass finished in a Antique Copper Has three 1/8 IPS female threads Swivels No Teeth Has...

3-Way Clutch Elbow - Cast Brass with a Antique Nickel Finish  Use with our 1/8 IPS Tubing or 1/8 IPS threaded rod.   Features: Solid Cast Brass finished in a Antique Nickel Has three 1/8 IPS female threads Swivels No Teeth Has...

Antique Nickel Finish Hollow Steel Tube - 3/8" - Threaded 1/8 IPS This listing is for Antique Nickel Finish hollow steel pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent unfinished.  Used for a variety different applications...

Solid Brass Hollow Tube - 3/8" - Threaded 1/8 IPS  NEW LOWER DISCOUNTED PRICING!!!!!! This listing is for solid brass hollow pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent unfinished so you can leave as is or shine to a...

Solid Copper Hollow Tube - 3/8" - Threaded 1/8 IPS This listing is for solid copper hollow pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent unfinished so you can leave as is or shine to a beautiful polished copper luster...

1/8 Black Iron Pipe - Threaded on each end   This listing is for black pipe that is threaded on each end. Each piece is sent raw and may have a little surface rust.     Black Pipe is mainly used for gas, but we are selling it here to...

Pipe Flange - Black Malleable Iron - Threaded 1/2" FNPT  Features: Measures 3" diameter Four (4) mounting holes  Mounting hardware NOT included, but you can use our Panhead screws or our Cap Nuts and threaded studs...

Pipe Flange - Black Malleable Iron - Threaded 1/4" FNPT   Features: Measures 3-1/2" diameter Four (4) mounting holes  Mounting hardware NOT included Threaded for 1/4" FNPT  Made in China    

Clutch Elbow - Cast Brass with an Antique Black Finish  Use with our 1/8 IPS Brass Tube or 1/8 NPT Iron Pipe or 1/8 IPS threaded rod.  Solid Cast Brass finished in an Antique Black Finish Has two 1/8 IPS female...

Clutch Elbow - Cast Brass with a Black Finish  Use with our 1/8 IPS Brass Tube or 1/8 NPT Iron Pipe or 1/8 IPS threaded rod.  Solid Cast Brass finished in an Antique Black Finish Has two 1/8 IPS female threads Swivels Has...

Clutch Elbow - Cast Brass  Use with our 1/8 IPS Brass Tube or 1/8 NPT Iron Pipe or 1/8 IPS threaded rod.    Solid Cast Brass Has two 1/8 IPS female threads Swivels Has Teeth Has Wireway to allow wire to pass...

Clutch Elbow - Cast Brass in Antique Copper Finish  Use with our 1/8 IPS Brass Tube or 1/8 NPT Iron Pipe or 1/8 IPS threaded rod.    Solid Cast Brass finished in Antique Copper Has two 1/8 IPS female threads Swivels Has...

Clutch Elbow - Cast Brass in Antique Nickel Finish  Use with our 1/8 IPS Brass Tube or 1/8 NPT Iron Pipe or 1/8 IPS threaded rod.    Solid Cast Brass finished in Antique Nickel Has two 1/8 IPS female threads Swivels Has...

Pan Head Screw - No. 8 #2-drive - 3/4" Total Length - Black Oxide finish   These work well as mounting screws with our 1/4" iron pipe flange.    Steel Screw w/ Black Oxide Finish Total Length: 3/4" Thread Length: 5/8" (from...

Clutch Elbow - Cast Brass  When used with our Steam Handles and our 10-24 Stud, you can create an incredible lamp or light.   Solid Cast Brass Has two 1/8 IPS female threads Swivels No Teeth Has Wireway to allow wire to pass...

Heavy Duty Clutch Elbow - Cast Brass  Solid Cast Brass Has two 1/8 IPS female threads Swivels T-Handle Has Teeth Has Wireway to allow wire to pass through Center body has a diameter of 1-3/8" Length end-to-end is 3" This does not work...

Die Stock Handle For use with Round Dies 9" Long Use with our lamp Die or any other 1" round split round die

Die - 1/8-27 NPS Round Split Adjustable Die For use with Round Die Stock Handles   1" Diameter 1/8-27 IPS NPS Use with our Die Stock handle or any other handles that accept a 1" split die Quantity Discount Available

Canopy Hole Reducer For use with ceiling canopies that have a 1-1/16" hole and you need to get to 1/8-IPS, 1/4-IPS, or 1/2-IPS.  Features: Solid Brass Height: 1-1/8" Ring Outside Diameter is 1-3/16" 3-Piece Design

Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/2 IPS (male) - NO SHOULDER For when you need to go from 1/8 IPS to 1/2 IPS or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings...

Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/2 IPS (male) - w/shoulder For when you need to go from 1/8 IPS to 1/2 IPS or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings...

Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/4 IPS (male)  For when you need to go from 1/8 IPS to 1/4 IPS or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings with a...

Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/4 IPS (male) - w/shoulder For when you need to go from 1/8 IPS to 1/4 IPS or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings...

Solid Brass Reducing Insert Coupling - 1/8 IPS to 1/4-20 For when you need to go from 1/8 IPS to 1/4-20 or vice-versa. These work great if you need to attach one of our Smallest Pulleys (1-3/4") to lamp parts.  If you are using these with 1/8 Iron...

Solid Brass Reducing Insert Coupling - 1/8 IPS to 1/4-20 - w/shoulder For when you need to go from 1/8 IPS to 1/4-20 or vice-versa. These work great if you need to attach one of our Smallest Pulleys (1-3/4") to lamp parts.  If you are using these...

Solid Brass Reducing Insert Coupling - 1/8 IPS to 1/4-27 - w/shoulder For when you need to go from 1/8 IPS to 1/4-27 or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings with a tap because...

Solid Brass Reducing Insert Coupling - 1/8 IPS to 10-24 - w/shoulder For when you need to go from 1/8 IPS to 10-24 or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings with a tap because...

Solid Brass Reducing Insert Coupling - 1/8 IPS to 5/16-27 - w/shoulder For when you need to go from 1/8 IPS to 5/16-27 or vice-versa.  If you are using these with 1/8 Iron Pipe Fittings, you may need to ream out the pipe fittings with a tap...

Tap - 1/8-27 NPS Straight Pipe Tap   1/8-27 IPS NPS Ground Thread Can be used with our Tap Wrench or other tap wrenches.  Quantity Discounts Available

Tap - 8-32 Straight Tap 8-32 Tap Ground Thread

Tap Wrench -  Fits 5/32" - 1/2" Straight Taps 12" Long Can be used with our Tap  Quantity Discounts Available

Heat Shrink Wire Connector - Splice Sleeve - 18 - 22 AWG Still wrapping wires with electrical tape? Not anymore. Very easy to use, our new Heat Shrink Splice Sleeves will insulate and protects the wire connection even in harsh environments. These are...