Description
Tap - 1/8-27 NPS Straight Pipe Tap
- 1/8-27 IPS NPS
- Ground Thread
- Can be used with our Tap Wrench or other tap wrenches.
- Quantity Discounts Available
Related Products


1/4-27 Finial - Flat Top - Black
MSRP:
Now:
$3.99
Was:
Finial - Flat Top Shape - Black Finish
Our decorative flat top finials have many uses. Can be use as feet, decorative accents, knobs, hardware, etc., but mainly used as a finial on a lamp shade...
Final-FlatTop-Black

Die - 1/8-27 - 1" OD - NPS
MSRP:
Now:
$16.95
Was:
Die - 1/8-27 NPS Round Split Adjustable Die
For use with Round Die Stock Handles
1" Diameter
1/8-27 IPS NPS
Use with our Die Stock handle or any other handles that accept a 1" split...
Die-1


Reducing Insert Coupling - Solid Brass - 1/4-27 x 1/8 IPS - with Shoulder
MSRP:
Now:
$0.39
Was:
Solid Brass Reducing Insert Coupling - 1/8 IPS to 1/4-27 - w/shoulder
For when you need to go from 1/8 IPS to 1/4-27 or vice-versa.
If you are using these with 1/8 Iron Pipe Fittings, you may...
RI-1427-S


Tap Wrench - 5/32" - 1/2" - Straight Handle
MSRP:
Now:
$15.95
Was:
Tap Wrench -
Fits 5/32" - 1/2" Straight Taps
12" Long
Can be used with our Tap
Quantity Discounts Available
TapWrench-1
Customers Also Viewed


Tap Wrench - 5/32" - 1/2" - Straight Handle
MSRP:
Now:
$15.95
Was:
Tap Wrench -
Fits 5/32" - 1/2" Straight Taps
12" Long
Can be used with our Tap
Quantity Discounts Available
TapWrench-1

Die - 1/8-27 - 1" OD - NPS
MSRP:
Now:
$16.95
Was:
Die - 1/8-27 NPS Round Split Adjustable Die
For use with Round Die Stock Handles
1" Diameter
1/8-27 IPS NPS
Use with our Die Stock handle or any other handles that accept a 1" split...
Die-1


Brass Tube - 3/8" O.D. - Threaded 1/8 IPS
MSRP:
Now:
$1.04
Was:
Solid Brass Hollow Tube - 3/8" - Threaded 1/8 IPS
NEW LOWER DISCOUNTED PRICING!!!!!!
This listing is for solid brass hollow pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is...
BrassTube-Threaded

Antique Nickel Tube - 3/8" O.D. - Threaded 1/8 IPS
MSRP:
Now:
$0.95
Was:
Antique Nickel Finish Hollow Steel Tube - 3/8" - Threaded 1/8 IPS
This listing is for Antique Nickel Finish hollow steel pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent...
AntNick-Threaded


Iron Pipe - 1/8 - Threaded on both ends
MSRP:
Now:
$1.95
Was:
1/8 Black Iron Pipe - Threaded on each end
This listing is for black pipe that is threaded on each end. Each piece is sent raw and may have a little surface rust.
Black Pipe...
IronPipe-Threaded


Die Stock Handle - 1" - for Round Split Dies
MSRP:
Now:
$8.95
Was:
Die Stock Handle
For use with Round Dies
9" Long
Use with our lamp Die or any other 1" round split round die
DieStock-1

Threaded Rod - Nipple - Category Size "A" - (3/8"- 1-3/4" Lengths)
MSRP:
Now:
$2.95
Was:
1/8 IPS Threaded Rod (Fully Threaded Pipe Nipples)
This threaded rod is the most common size in the lighting industry. It is hollow so you're able to feed wire through it...
ThreadRod-A


Copper Tube - 3/8" O.D. - Threaded 1/8 IPS
MSRP:
Now:
$2.25
Was:
Solid Copper Hollow Tube - 3/8" - Threaded 1/8 IPS
This listing is for solid copper hollow pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent unfinished so you can leave as is or...
CoppTube-Threaded


Glass Cylinder - Hand Blown - 3" x 8"
MSRP:
Now:
$12.95
Was:
8" Hand-Blown Clear Cylinder Chimney
Measuring 8" height, our glass shade is a perfect piece for that next project or special lamp. Many different uses.
Please keep in mind that just like in...
Chimney-3-Clear


Steel Ball Kit - 3-1/2" - Unfinished
MSRP:
Now:
$12.95
Was:
Two-Piece Steel Ball Kit - Unfinished Steel
Our two-piece Steel Ball Kit is perfect as a counter-weight for your next pulley light. It would look nice on any pendant light, steampunk lamp, or...
MetalBall-3114-Unf