Description
Canopy Hole Reducer
For use with ceiling canopies that have a 1-1/16" hole and you need to get to 1/8-IPS, 1/4-IPS, or 1/2-IPS.
Features:
- Solid Brass
- Height: 1-1/8"
- Ring Outside Diameter is 1-3/16"
- 3-Piece Design
Related Products


Ceiling Canopy Kit - Black
MSRP:
Now:
$6.88
Was:
Ceiling Canopy Kit - Black Finish
Our Ceiling Canopy Kits contain everything you need to install your lights into an existing ceiling outlet. This is NOT just the canopy alone, it also...
Canopy-Kit-Black


Ceiling Canopy - Bare Metal
MSRP:
Now:
$5.95
Was:
Ceiling Canopy - Unfinished Metal
This unfinished metal Ceiling Canopy is a perfect DIY piece. Left unfinished, you are able to paint it any color you wish, leave it unfinished for that...
Canopy-Metal

Ceiling Canopy - Solid Copper
MSRP:
Now:
$13.85
Was:
Ceiling Canopy - Solid Copper - Unfinished
This unfinished Solid Copper Ceiling Canopy is a perfect DIY piece. Left unfinished, it already has a slight patina that many prefer. Or, you can polish it...
Canopy-Copper


Ceiling Canopy - Solid Brass
MSRP:
Now:
$10.85
Was:
Ceiling Canopy - Solid Brass - Unfinished
This unfinished Solid Brass Ceiling Canopy is a perfect DIY piece. Left unfinished, it already has a slight patina that many prefer. Or, you can polish it...
Canopy-Brass

Ceiling Canopy - Satin Black
MSRP:
Now:
$9.95
Was:
Ceiling Canopy - Unfinished Metal
This powder-coated black metal Ceiling Canopy is a nice black canopy.
This is for the canopy only...there is no hardware included.
Canopy-Satin-Blk
Customers Also Viewed


Reducing Insert Coupling - Solid Brass - 1/2 IPS x 1/8 IPS - with Shoulder
MSRP:
Now:
$1.88
Was:
Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/2 IPS (male) - w/shoulder
For when you need to go from 1/8 IPS to 1/2 IPS or vice-versa.
If you are using these with 1/8 Iron Pipe...
RI-1218-S


Brass Hollow Tube - 3/8" O.D. - Threaded 1/8 IPS
MSRP:
Now:
$1.04
Was:
Solid Brass Hollow Tube - 3/8" - Threaded 1/8 IPS
NEW LOWER DISCOUNTED PRICING!!!!!!
This listing is for solid brass hollow pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is...
BrassTube-Threaded


Reducing Insert Coupling - Solid Brass - 1/2 IPS x 1/8 IPS
MSRP:
Now:
$1.88
Was:
Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/2 IPS (male) - NO SHOULDER
For when you need to go from 1/8 IPS to 1/2 IPS or vice-versa.
If you are using these with 1/8 Iron...
RI-1218


Iron Pipe - 1/8 - Threaded on both ends
MSRP:
Now:
$1.95
Was:
1/8 Black Iron Pipe - Threaded on each end
This listing is for black pipe that is threaded on each end. Each piece is sent raw and may have a little surface rust.
Black Pipe...
IronPipe-Threaded


Pipe Room Canopy - Industrial
MSRP:
Now:
$17.85
Was:
Industrial Pipe Room Ceiling Canopy
The Pipe Room Canopy can be used as a ceiling canopy, wall canopy, or base for a table lamp and has many other uses. The center hole accepts 1/2"-NPT Iron Pipe so...
Canopy-PipeRoom


Engine House No.5 Industrial Ceiling Canopy
MSRP:
Now:
$18.85
Was:
Engine House No.5 Industrial Ceiling Canopy/Base - Solid Cast Aluminum
Imagine walking into one of the Engine House Rooms of an old abandoned industrial warehouse. Although the engines, compressors,...
Canopy-EH5


Reducing Insert Coupling - Solid Brass - 1/4 IPS x 1/8 IPS - with Shoulder
MSRP:
Now:
$0.39
Was:
Solid Brass Reducing Insert Coupling - 1/8 IPS (female) to 1/4 IPS (male) - w/shoulder
For when you need to go from 1/8 IPS to 1/4 IPS or vice-versa.
If you are using these with 1/8 Iron Pipe...
RI-1418-S

Hollow Threaded Tube - Nipple - Category Size "A" - (3/8"- 1-3/4" Lengths)
MSRP:
Now:
$2.95
Was:
1/8 IPS Threaded Rod (Fully Threaded Pipe Nipples)
This threaded rod is the most common size in the lighting industry. It is hollow so you're able to feed wire through it...
ThreadRod-A

Antique Nickel Hollow Tube - 3/8" O.D. - Threaded 1/8 IPS
MSRP:
Now:
$1.04
Was:
Antique Nickel Finish Hollow Steel Tube - 3/8" - Threaded 1/8 IPS
This listing is for Antique Nickel Finish hollow steel pipe (tubing) that is threaded on each end 1/8 IPS. Each piece is sent...
AntNick-Threaded


Reducing Insert Coupling - Solid Brass - 1/4-20 x 1/8 IPS - with Shoulder
MSRP:
Now:
$0.39
Was:
Solid Brass Reducing Insert Coupling - 1/8 IPS to 1/4-20 - w/shoulder
For when you need to go from 1/8 IPS to 1/4-20 or vice-versa. These work great if you need to attach one of our Smallest Pulleys...
RI-1420-S