Engine House No.5 Industrial Ceiling Canopy

Engine House No.5 Industrial Ceiling Canopy/Base - Solid Cast Aluminum

Imagine walking into one of the Engine House Rooms of an old abandoned industrial warehouse. Although the engines, compressors, and conveyor belts are no longer working and the noise is long gone, in the middle of the room on the ceiling you see an old light attached to an incredible looking ceiling canopy.  This is the ceiling canopy we created.  

Introducing our Engine House No.5 Industrial Ceiling Canopy/Base. You won't find any other like it, because like many of our products, we designed it and made it to be different. As you can see from our product line, we don't like selling "cookie cutter" products like everyone else. We purposely distress the finish so that it looks old, grungy, and worn. (see disclaimer in red below)

Used as a ceiling canopy, it's perfect for your industrial/steampunk/vintage lights as it will definately set your project apart from any other. It can also be used as a base for a wall sconce or table lamp base with a little ingenuity on your part. 

Our cast metal canopy is slightly over-sized (5-5/8") on purpose. Sometimes, you may find yourself with a hole in the ceiling that is larger than those mini ceiling canopies can cover.......no problem with this one. 

We also have an optional Pendant Adapter that includes a black strain relief for use with round or twisted cloth-covered wire. In addition to holding our wire, it will also accept our black iron pipe or brass tubing in different lengths. The opportunities are endless for your next unique project. 

The Engine House Canopy INCLUDES either the Hook or Loop. (you choose above in options)

Features:

• Cast Aluminum Black Iron Finish
• 5-5/8"" diameter
• 1-3/8" deep
• Raised Lettering says, "Engine House No 5"
• Two mounting holes 
• Center Hole is threaded for the hook or loop (it is NOT threaded for black pipe). The hook has a 5/16" hole through the center. 
• Included with the canopy is a mounting bracket, appropriate 8-32 screws, hook, and hardware to mount to a standard electrical junction box.
• Includes Hook or Loop (your choice)
• The photo below shows our Optional Pendant Adapter. It is NOT included and must be selected above in the options. 

Disclaimer

*Please note that this canopy will have nicks, scratches, smudges, tool marks, embellishments, flawed finish, missing paint, etc. We have done this purposely to create a character not found on modern day off-the-shelf products. Finishes are NOT meant to be perfect, but old, grungy looking, and well worn. You can certainly paint them yourself if you need a perfect finish. If you're looking for mass-produced parts with flawless finishes, then most of our products are not for you. Not being mean, that's how we purposely make this product. In other words, if you're very "particular", we recommend you go visit some of those big box stores (and some of our competitors) so you can buy the same old boring parts everyone else has… just say’n. :)