SteamLight Gauge – Antique Copper
Tired of looking for those used gauges that may or may not work with your project? Need a gauge that actually works when your light is turned on? You just found it!
Introducing our working SteamLight Gauge. As you can see in the pictures, this awesome gauge is going to add a little spunk to your lights.
The analog voltmeter measures AC 0-300V (class 2.5 accuracy) and can certainly be used as a voltmeter, but we like to use it in Steampunk Lamps/Lights as a cool working gauge in which the needle moves when the power is turned on.
Measures 3-1/2” in diameter. Protrudes ½” from surface of whatever you are mounting it to. Back is flat. If you will be surface mounting the gauge, it will require a 1-7/8” hole to accommodate the back of the gauge. Housing is not yet available, but until then you create your own housing for a truly unique piece.
The actual gauge face itself weighs a little over one-half pound. Yes, a half pound! Very solid cast alloy metal. Best quality. Enjoy.
The following is included in this listing:
- One (1) Gauge Face (measures 3-1/2” diameter) your choice of finish
- One (1) working Voltmeter
- Mounting Hardware (see below)
Mounting Hardware includes the following:
- Four (4) of our hard-to-find Cap Nuts (threaded 8/32)
- Four (4) of our threaded studs (1” x 8/32)
- Four (4) of our hex nuts (threaded 8/32)
**Please keep in mind that we have photographed the gauge with various housings, hardware, pieces, lamps, etc., to give you a few ideas as to how it can be used. You will not receive lamps, housings, or anything else in the pictures. (see above for what is included) They are used for photographic purposes only and we suggest you design your own piece.